banner



How To Clean An Air Hockey Table Without Damaging It

If you are an air hockey enthusiast and you have recently bought an air hockey table, it is for certain that you are looking for excellent playing experience.

Most people stress on the two virtually important aspects when buying an air hockey table. Ane is, of grade, good playing experience and another is the aspect of the durability of the table.

However, one time yous purchase an air hockey tabular array, a lot depends on how you maintain it for both durability and play experience.

In this post, we volition walk you through some of the almost effective ways to clean air hockey table and the cleaning rarely takes a whole lot of time.

Why Practice You Need to Clean Your Air Hockey Table?

In case of an air hockey table that is not cleaned and maintained for many days, it can badly bear on the playing experience.

But to help you visualize the worst-example scenario, with accumulated dust on the table, information technology will get the puck movement pretty sluggish. In some cases, the puck may not even travel all the manner to your opponent.

With time, the air holes accrue a lot of dirt which may pb to the clogging of the holes. This can adversely affect the playing experience.

Somewhen, you will have to exert more force to evangelize the puck towards your opponent and the playing will no longer be equally enjoyable as information technology used to be earlier, while the table was brand new.

When Do You Need to Clean Your Air Hockey Table?

As a matter of fact, it is not difficult to determine the fourth dimension when you should consider cleaning your air hockey table. Here are a few signs for you to consider cleaning information technology:

  • When the movement of puck gets tedious
  • When dust and clay are visible around the air holes
  • When the table top loses its shine

Cleaning Air Hockey Table Takes 6 Important Steps:

  1. Plough On the Fans/Blowers
  2. Vacuum the Air Hockey Table Top
  3. Wipe the Table
  4. Make clean the Air Holes
  5. Shine the Air Hockey Table Surface
  6. Sand the Pucks and Mallets

Step by Stride Guide to Clean Air Hockey Tabular array

Step 1: Plow On the Fans/Blowers

One important practice to follow while you are cleaning your air hockey table is to keep the fans on and what really does is prevent dust, dirt, or even liquids from entering into the air holes.

Step 2: Vacuum the Air Hockey Table Top

The adjacent best thing yous tin do is make clean upward the grit and cobwebs using a vacuum cleaner.

However, it is important to put the vacuum cleaner not besides close to the surface of the table as information technology may cause scratches on the tabular array surface and damage it. Make sure to cover the entire tabular array top surface with the vacuum cleaner and spend some extra fourth dimension vacuuming over the air holes to remove grit particles considering table holes require more attention.

It is ever a wise matter to cover the table top when you are not using it every bit this largely prevents the accumulation of dust and dirt on the table surface.

Check the Best Price of Air Hockey Cover on Amazon>>

Stride 3: Wipe the Table

In the next step, you can keep the air blowers on and use a soft cotton cloth or microfiber cloth to wipe the surface of the table. Y'all can also use an alcohol-based cleanser, dishwashing liquid and window cleaner for the purpose. Even so, it is important to make sure that the cleanser does not comprise ammonia.

Apply the cleanser on the cloth and never on the table while cleaning air hockey table

As far as using the air hockey tabular array cleaner is concerned, you must apply the cleanser on the cloth and never on the table. Another important piece of advice is to use very little liquid on the cloth as this will help the table dry up in very little time.

It is important to scrub the table surface hard enough to remove the dirt stuck to the tabular array's surface. Apart from that, you can likewise clean the table legs and outer sides of the table.

For inner sides, it totally depends on your personal choice. Some players are in favor of non to make clean the inner sides of the table because exiguous dirt can help in making a depository financial institution shot.

Step iv: Clean the Air Holes

Just in case you see that vacuuming the air holes is non completely removing the dirt from the air holes and you are still wondering how to clean air hockey tabular array holes, you may need to put some actress effort and yous many to clean them using toothpicks or pipe cleaners.

However, while you're trying to remove the dirt out of the holes using a toothpick, you likewise have to make sure that you are non pushing it further down the hole. Besides, it is ever recommended that you keep the fan on so that the dirt that you dislodge from the holes right away gets blown out.

Step 5: Polish the Air Hockey Table Surface

Later on yous take done this, yous can actually try applying air hockey table wax (Amazon link >>) on the surface of the table. Even though this is not a mandatory affair, it tends to extend the immovability of the tabular array.

However, it is of import to make certain that y'all employ but a sparse even glaze of polish as an excess of it can clog the air holes.

After the table top dries up, y'all can clean it with a soft cloth and this will assist the table surface with a Shiny gloss.

Step 6: Sand the Pucks and Mallets

The puck and the mallet have certain clothing and tear when you apply them over a long flow. This may get the game-play sluggish and less heady.

One quick workaround is to apply fine sanding paper to sand the puck as well as the lesser of the mallet. This will eventually help you hit the puck quicker and farther once once more.

However, this doesn't actually work on mallets with a felt bottom. In case you lot accept a mallet with a felt bottom and you experience a decline in its quality, the best matter y'all can do is to supplant the felt pads.

Wrapping Upwards

For a skillful air hockey playing experience, it is of import that you take well care of every aspect and 1 important aspect is certainly cleaning the table on a regular basis.

If you lot neglect to do so, it may largely hamper the playing experience. As far equally cleaning the tabular array is concerned, it is really not that hard and on pinnacle of that, it does non take much of your time.

We tried our best to requite you a comprehensive picture of how to clean air hockey table. If y'all take read this post carefully and then far, you should have no difficulty in cleaning your air hockey table from now on.

Read More Well-nigh Air Hockey:

  • What Are the Rules of Air Hockey?
  • What is the Standard Air Hockey Tabular array Size?

Tin can You Resurface an Air Hockey Table?


Yeah, y'all can resurface your air hockey table in a few ways. Nonetheless, information technology depends on the extent of its deterioration.

In case your tabular array has a paring, you can make full it with some clear epoxy till the surface of the table and after it dries up, sand it using fine sandpaper.

Another mode is how yous handle your table if ever any liquid is spilled over the tabular array. In such a example, you must keep using the air blower until it completely dries upwards. Until so, yous must not turn your table as the liquid may get into the air holes.

You can also resurface the air hockey table by using fiber, plywood or pegboard to measure and drill your air holes.

However, if none of these happens to work, you tin can consider buying one of the different playing surfaces bachelor in the market place. Equally a matter of fact, you tin place an lodge 1 online with whatsoever of the air hockey manufacturer sites.

How Can I Make Air Hockey Table Slide Better?

To brand your air hockey tabular array slide meliorate, yous could wipe the table top with a soft textile with a little fleck of booze-based cleanser on it or employ air hockey polish on the table top, Another manner to do this is by sanding the puck and mallet. Y'all should besides brand a habit of covering your air hockey table properly when not using it.

How Tin can I Make Air Hockey Table Slippery?

To brand the air hockey table slippery, you can either use an air hockey shine or wax on it. For this, you tin employ stick wax available in puck course (Amazon link >>). Withal, y'all must make sure that you use just a thin coat as this will help the tabular array dry up quicker. Apart from that, you tin spray silicone lubricant on the surface.

Source: https://www.99sportz.com/how-to-clean-air-hockey-table/

Posted by: lanegrosse.blogspot.com

0 Response to "How To Clean An Air Hockey Table Without Damaging It"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel